I am building a weather station that includes air pollution information such as PM 1, PM 2.5 and PM 10. I see that you support the PurpleAir. How can I post data from my stations to Weather Underground?
Thanks!
Thanks!
- 3 Posts
- 0 Reply Likes
Posted 2 years ago
- 2 Posts
- 0 Reply Likes
Hi, I am trying to do exactly the same thing, without success.
If this can help, from this link http://wiki.wunderground.com/index.php/PWS_-_Upload_Protocol it seems (Pollution Fields section) that one should add the codes "AqPM10", ... to the usual HTTP GET query for uploading data, anyway it does not seem to work.
The actual implemented command parses only the parameters shown in "usage" answer.
May be there is another php script to call to upload extended data.
I sent a support request.
Stay in touch,
Luca
If this can help, from this link http://wiki.wunderground.com/index.php/PWS_-_Upload_Protocol it seems (Pollution Fields section) that one should add the codes "AqPM10", ... to the usual HTTP GET query for uploading data, anyway it does not seem to work.
The actual implemented command parses only the parameters shown in "usage" answer.
May be there is another php script to call to upload extended data.
I sent a support request.
Stay in touch,
Luca
(Edited)
- 2 Posts
- 0 Reply Likes
Hi,
today I checked again my personal weather station page and I noticed that, in some way, now weather underground wps app seems to acquire PM data and to show them in the graph view! I have not changed anything in the upload method of my software. There are no PM columns available yet, in the table view. However, it seems that now they are at least accepting and storing data.
Please, look for IFALCONA6 wps and give it a look. There are some spikes in the PM graphs, but I think that they come from some unmanaged error occurring in my software at power down and subsequent restart. I will check it.
Try again and let me know if it works also for you.
Regards,
Luca
today I checked again my personal weather station page and I noticed that, in some way, now weather underground wps app seems to acquire PM data and to show them in the graph view! I have not changed anything in the upload method of my software. There are no PM columns available yet, in the table view. However, it seems that now they are at least accepting and storing data.
Please, look for IFALCONA6 wps and give it a look. There are some spikes in the PM graphs, but I think that they come from some unmanaged error occurring in my software at power down and subsequent restart. I will check it.
Try again and let me know if it works also for you.
Regards,
Luca
- 3 Posts
- 0 Reply Likes
Luca:
That's great! I confirmed that I can see your PM 2.5 and PM 10 data. I'll work on it again on my end when I have time and let you know if I have similar luck.
Thanks,
Rob
That's great! I confirmed that I can see your PM 2.5 and PM 10 data. I'll work on it again on my end when I have time and let you know if I have similar luck.
Thanks,
Rob
- 12 Posts
- 21 Reply Likes
Guys, i too am having problems with getting my PA sensors data linksed to my WU ID. Any tips? PA have said my data is on WU's site as they push it to WU:
http://sensors-out.wunderground.com/v1/pws/data/ONEWTO1
not sure how it can get to my WU ID site though.
https://www.wunderground.com/health/gb/conlig/ICODOWNN2?cm_ven=localwx_modaq
http://sensors-out.wunderground.com/v1/pws/data/ONEWTO1
not sure how it can get to my WU ID site though.
https://www.wunderground.com/health/gb/conlig/ICODOWNN2?cm_ven=localwx_modaq
Rob
Rob.